- Cut Off Saw -
CS-18L/CS-18M/CS-18S

CS-18L

Specification of cut-off saw for wood material

Cutting size(TxW):

2"x12”,3”x11,4”x10

Saw blade size:

18"x120Tx3.4x25.4

RPM(60HZ&50HZ):

3630RPM/3050RPM

Cutting ability: 81 times/min

Air press inquiry: 4-5kgw/cm²

Diameter of dusty collector: 4"

Motor: 7.5HP(10HP optional)

Control mode: foot switch

Working table size: 660x700mm

Working table height: 890mm

Net weight: 350kgs

Gross weight: 410kgs

Packing size:

L940mmxW850mmxH1350mm

※Dimensions and specifications shown in the catalogue are subject to change without prior notice.

CS-18S

High security cut-off machine specification

Cutting size(TxW):

2"x12”,3”x11,4”x10

Saw blade size:18"x120Tx3.4x25.4

RPM(60HZ&50HZ):

3630RPM/3050RPM

Cutting ability: 81 times/min

Air press inquiry: 4-5kgw/cm²

Diameter of dusty collector: 4"

Motor: 7.5HP(10HP optional)

Control mode: foot switch

Working table size: 660x700mm

Working table height: 890mm

Net weight: 350kgs

Gross weight: 410kgs

Packing size:

L940mmxW850mmxH1350mm

※Dimensions and specifications shown in the catalogue are subject to change without prior notice.

CS-18S Safety devices

1. EMG stop.

2. Hands push twin press button (also can switch to use foot switch.)

3. Hands push twin press button (if it not press at same time, that cannot cutting when hands press the buttons.)

4. Power protecting switch.
   Cutting safety cover (flipper type.)

5. Protecting device for stop air supply when open front door.

6. Protecting device for stop power supply when open front door.

7. Protecting device for stop air supply when it replace saw blade.

8. Protecting device for stop power supply when it replace saw blade.